Heating & Cooling Preventative Maintenance Plans in Northern Atlanta and Marietta

Preventive maintenance is important to the longevity of your system & your manufacturers’ warranty. In fact, 80% of all breakdowns occur from dirt in your system.

By purchasing a maintenance agreement, you are saving money from the start.

By going on the maintenance agreement, your cost for a year is only $239 for the first system and $199 for each additional system, not to mention the additional benefits.


Cool Air Mechanical's Preventive Maintenance Program Includes:

  • Two Seasonal Visits Per Year
  • Units are checked electrically & mechanically to ensure proper performance
  • Refrigeration levels are checked during the Spring/Summer session
  • Amp draws are verified and system operation is confirmed
  • 10% discount on all repairs
  • 24 hours emergency service
  • Up-front pricing
  • Priority service appointment
One (1) Year of Preventive MaintenanceFor just $239!
Save today!
Click to view coupon

Your Air Conditioning Tune Up Includes:

  • Evaporator Coils Inspection
  • Condensate lines checked
  • Condensate pumps checked
  • Humidifiers drained and shut off (if applicable)
  • Duct connections checked
  • Blower compartments inspection
  • Oil indoor blower (if applicable)
  • Inspection of indoor blower cage
  • Thermostats checked
  • Secondary drain pans inspection
  • Confirm all components inside operate properly
  • Check service valves
  • Check service valves
  • Inspect the disconnect, fuses and breaker
  • Check contactor
  • Check capacitors
  • Check outdoor fan motors
  • Inspection of condenser coils
  • Inspect compressors
  • Check electrical connections
  • Inspect electrical wires
  • Check amp draw
  • Check freon levels
  • Check air filters

Your Heating System Tune Up Includes:

  • Inspect furnace or air handlers
  • Inspect vent piping
  • Check chimney base
  • Inspect gas valves
  • Test hot surface igniters
  • Test flame sensors
  • Inspect ignition systems
  • Check roll out switches
  • Check safety switches
  • Check pressure switches
  • Inspect blower motor
  • Inspect blower compartment
  • Inspect indoor blower cage
  • Oil blower motor (if applicable)
  • Inspect bearings
  • Inspect relays
  • Inspect electrical connections
  • Check all wire connections
  • Run system and check gas ignition
  • Check temperature rise
  • Check all thermostats
  • Check for proper combustion
  • Inspect domestic water heater
  • Check air filters

Plumbing Protection Plan Includes:

  • Locate and tag all emergency water shut-off valves
  • Check operation of all toilets (includes dye testing tanks)
  • Check all fixture drains for leaks
  • Check all exposed hot and cold water supply lines
  • Check all faucets for leaks
  • Check all washing machine hoses
  • Locate and check all cleanouts
  • Pour water down all floor drains

Plus Service to Your Water Heater

Gas Water Heater
  • Check and clean main burner and pilot
  • Inspect and flue pipe
  • Check for proper vent draft
  • Check for water leaks
  • Check for operation of emergency shut-off valves
  • Check temperature
  • Check pressure safety relief
Electric Water Heater
  • Check operation of elements
  • Check thermostat operation
  • Check condition of wiring
  • Check for operation of emergency shut-off valves
  • Check temperature
  • Check drain valve operation
Tank Type Water Heater
  • Drain and flush the bottom of the tank
Tankless Water Heater
  • Drain and flush with a descaling solution